MODELING THE 1958 LITUYA BAY MEGA-TSUNAMI, II
2002
Author
Charles L. Mader, Michael L. Gittings
Abstract
Lituya Bay, Alaska is a T-Shaped bay, 7 miles long and up to 2 miles wide. The two arms at the head of the bay, Gilbert and Crillon Inlets, are part of a trench along the Fairweather Fault. On July 8, 1958, an 7.5 Magnitude earthquake occurred along the Fairweather fault with an epicenter near Lituya Bay.A mega-tsunami wave was generated that washed out trees to a maximum altitude of 520 meters at the entrance of Gilbert Inlet. Much of the rest of the shoreline of the Bay was denuded by the tsunami from 30 to 200 meters altitude.In the previous study it was determined that if the 520 meter high run-up was 50 to 100 meters thick, the observed inundation in the rest of Lituya Bay could be numerically reproduced. It was also concluded that further studies would require full Navier-Stokes modeling similar to those required for asteroid generated tsunami waves.During the Summer of 2000, Hermann Fritz conducted experiments that reproduced the Lituya Bay 1958 event. The laboratory experiments indicated that the 1958 Lituya Bay 524 meter run-up on the spur ridge of Gilbert Inlet could be caused by a landslide impact.The Lituya Bay impact landslide generated tsunami was modeled with the full Navier- Stokes AMR Eulerian compressible hydrodynamic code called SAGE with includes the effect of gravity.
DOI
Journal
Science of Tsunami Hazards
Source
DOAJ